[Announce] GnuPG's ElGamal signing keys compromised
Werner Koch
wk at gnupg.org
Thu Nov 27 09:29:51 CET 2003
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
GnuPG's ElGamal signing keys compromised
==========================================
Summary
=======
Phong Nguyen identified a severe bug in the way GnuPG creates and uses
ElGamal keys for signing. This is a significant security failure
which can lead to a compromise of almost all ElGamal keys used for
signing. Note that this is a real world vulnerability which will
reveal your private key within a few seconds.
Please *take immediate action and revoke your ElGamal signing keys*.
Furthermore you should take whatever measures necessary to limit the
damage done for signed or encrypted documents using that key.
Please do not send private mail in response to this message as I won't
have the time to catch up with all the messages. The mailing list
gnupg-users at gnupg.org is the best place to discuss this problem
(please subscribe first so you don't need moderator approval [2]).
Note that the standard keys as generated by GnuPG (DSA and ElGamal
encryption) as well as RSA keys are NOT vulnerable. Note also that
ElGamal signing keys cannot be generated without the use of a special
flag to enable hidden options and even then overriding a warning
message about this key type. See below for details on how to identify
vulnerable keys.
This message is signed using the usual GnuPG distribution key[1]. I
apologize for this severe bug and all the problems resulting from it.
Background:
===========
For historic reasons [3], GnuPG permits creating ElGamal keys which
are usable for both encryption and signing. It is even possible to
have one key (the primary one) used for both operations. This is not
considered good cryptographic practice, but is permitted by the
OpenPGP standard.
It was not anticipated that these keys would still be used for signing
because they have several disadvantages: The signature is much larger
than a RSA or DSA signature, verification and creation takes far
longer and the use of ElGamal for signing has always been problematic
due to a couple of cryptographic weaknesses when not done properly.
Thus I have always dissuaded people from using ElGamal keys for
signing; however they are still used and about 200 keys per year are
generated and uploaded to the keyservers.
In January 2000, as part of version 1.0.2, the GnuPG code was changed
to create ElGamal keys which work more efficiently for encryption
(selecting a smaller x secret exponent and using a smaller k for
encryption). While making this change the problem with signing keys
was accidentally introduced: the same small k for encryption was also
used for signing. This can be used for a cryptographic attack to
reveal the private key (i.e. the secret exponent x) if a signature
made using that key is available. Such a signature is always
available for primary ElGamal keys because signatures created with
that key are used to bind the user ID and other material to the
primary key (self-signatures). Even if the key was never used for
signing documents it should be considered compromised.
Note that this weakness does not apply to the far more common
encrypt-only (type 16) ElGamal key as GnuPG does not permit signatures
to be issued by this key type. Only the ElGamal sign+encrypt key
(type 20) is affected and then only when used to make a signature with
a GnuPG version 1.0.2 or later.
Impact:
=======
All ElGamal sign+encrypt keys (type 20) generated with GnuPG 1.0.2 or
later must be considered compromised. Keys generated and used only
with prior versions might still be safe but should ideally be revoked
too. Note that even if an ElGamal sign+encrypt key was generated
before GnuPG 1.0.2, using that key in GnuPG 1.0.2 or later to issue
signatures will still compromise the key.
Again, ElGamal encrypt-only keys (type 16) from any version of GnuPG
are *not* affected.
Solution:
=========
Do not use *ElGamal sign+encrypt keys (type 20)*. Revoke all those
keys immediately. Consider all material signed or encrypted with such
a key as compromised.
Forthcoming GnuPG versions will remove the ability to create such keys
and the ability create ElGamal signatures.
How to detect ElGamal type 20 keys:
===================================
We have to distinguish between two cases: The primary key is ElGamal
sign+encrypt versus just a subkey is ElGamal sign+encrypt.
The first case requires immediate attention, like this one:
$ gpg --list-keys xxxxxxxx
pub 2048G/xxxxxxxx 2001-xx-xx Mallory <mallory at example.net>
such a key might be followed with additional "uid", "sig" or "sub"
lines. Here an ElGamal sign+encrypt key is used and very likely
created with GnuPG >= 1.0.2. The capital letter "G" indicates a
ElGamal sign+encrypt key. REVOKE such a key immediately.
The second case is about subkeys. Here is an example:
$ gpg --list-keys 621CC013
pub 1024D/621CC013 1998-07-07 Werner Koch <wk at gnupg.org>
uid Werner Koch <werner.koch at guug.de>
uid Werner Koch <wk at g10code.com>
sub 1536g/ADF6A6E1 1999-02-20 [expires: 2002-11-01]
sub 1536G/B5A18FF4 1998-07-07 [expires: 2002-07-06]
sub 1536R/23D2A63D 2002-07-30 [expires: 2003-12-31]
This my usual working key, which is a standard GnuPG key with some
additional subkeys added over time. It is a good example because one
subkey was created as type 20 signing and encrypt ElGamal key. It is
the second subkey:
sub 1536G/B5A18FF4 1998-07-07 [expires: 2002-07-06]
The capital letter "G" denotes such an possible compromised subkey
whereas the first subkey:
sub 1536g/ADF6A6E1 1999-02-20 [expires: 2002-11-01]
is a standard encryption-only subkey as indicated by the small letter
"g". That key is not affected.
The keys denoted with this capital letter "G" should be REVOKED unless
you are definitely sure those subkeys were never used to create a
signatures with GnuPG >= 1.0.2.
How to revoke a key:
====================
To create a revocation certificate for the entire key (primary and
all subkeys), you do:
gpg --gen-revoke your_keyid >foo.rev
If you have lost access to your passphrase, hopefully you have a
pre-manufactured revocation certificate (either on a floppy or printed
on a sheet of paper) which you may the use instead of the above
command.
This revocation certificate should then be imported into
GnuPG using:
gpg --import <foo.rev
now export your key to a file and distribute it to the keyservers.
gpg --export -a your_keyid >mykey.asc
gpg --keyserver subkeys.pgp.net --send-keys your_keyid
If your primary key is not an ElGamal key, you might need to revoke a
subkey. Note again that only type 20 ElGamal keys (denoted by a
capital letter "G") require revocation - the standard ElGamal
encrypt-only key (small g) is perfectly fine. Use gpg's edit command
like this:
$ gpg --edit-key xyzxyzxy
The key listing will be shown. Select the subkey you want to revoke,
using the command "key 2" (or whatever subkey it is) and then enter
the command "revkey" and follow the prompts. Continue then with an
export as described above.
How many keys are affected?
===========================
I can't tell for sure. According to the keyserver statistics, there
are 848 primary ElGamal signing keys which are affected. These are a
mere 0.04 percent of all primary keys on the keyservers. There are
324 vulnerable subkeys on the keyservers, too.
Some of the subkeys might have never been used for signing because for
some time in the past GnuPG created the encryption subkey as type 20
but didn't used it for signing because the DSA primary key was used
instead. It is better to revoke such keys nevertheless.
Note again that the standard configuration of GnuPG does not allow
creating the vulnerable sign+encrypt ElGamal keys and that neither DSA
(type 17), RSA (type 1) nor ElGamal encrypt-only keys (type 16) are
affected.
Thanks
======
Phong Nguyen [4] analyzed the implementation of GnuPG's cryptographic
parts and found this vulnerability. He also developed actual code to
mount the attack and was so kind to give me enough time to have a look
at his paper and to gather a list of known type 20 keys owners.
I am really sorry for this,
Werner
[1] To get a fresh key you might want to consult the keyservers or get
it from using "finger wk at g10code.com" or "finger dd9jn at gnu.org".
[2] See http://lists.gnupg.org/mailman/listinfo/gnupg-users .
[3] The patent status of DSA was not clear when I started to write
GnuPG back in 1997.
[4] Working at the French National Center for Scientific Research and
the Ecole normale superieure: http://www.di.ens.fr/~pnguyen/ .
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/xavwaLeriVdUjc0RAquhAJ9crSJ2j8EbqaAnbJGoXBsgERPLaACePwcP
70laYWsyhXkzVgqL2X4ELVk=
=xGWG
-----END PGP SIGNATURE-----
_______________________________________________
Gnupg-announce mailing list
Gnupg-announce at gnupg.org
http://lists.gnupg.org/mailman/listinfo/gnupg-announce
More information about the Gnupg-devel
mailing list