GNUK 1.2.15 on XNUCLEO-F103RB does not respond to gpg --card-status

[Mike]

The XNUCLEO-F103RB does not respond to gpg --card-status after flashing
GNUK 1.2.15 with commit hash 2142d0aa3533a9bb0686da27f803543301b1c88b. 
I flashed it via connecting ST-LINKv2 based on STM32F103C816. The target
controller is STM32F103RBT6. 

OpenOCD writing log is at https://termbin.com/6kdp

Versions of used software:

pacman -Q openocd arm-none-eabi-gcc arm-none-eabi-newlib

openocd 1:0.10.0-4
arm-none-eabi-gcc 10.2.0-1
arm-none-eabi-newlib 4.1.0-1

After writing, I pressed onboard reset button twice before attempting to
use it with gpg.