[git] GpgOL - branch, master, updated. gpgol-1.3.0-56-g1ae53b7
by Andre Heinecke
cvs at cvs.gnupg.org
Fri Mar 11 10:31:30 CET 2016
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GnuPG extension for MS Outlook".
The branch, master has been updated
via 1ae53b7fe54b863bf1d6a0891fbf37ae63abc074 (commit)
from 6acc9b8274d2c0d39f23326040532aad518b2ad6 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 1ae53b7fe54b863bf1d6a0891fbf37ae63abc074
Author: Andre Heinecke <aheinecke at intevation.de>
Date: Fri Mar 11 10:29:56 2016 +0100
Add build instructions and update README
* INSTALL: Replace with project specific information.
* README: Note UIServer requirement.
--
The old INSTALL was pretty generic and not really helpful
for someone asking how to build gpgol.
diff --git a/INSTALL b/INSTALL
index 095b1eb..e09dc59 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,231 +1,55 @@
-Installation Instructions
-*************************
+Installation Instructions for GpgOL
+***********************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
-Software Foundation, Inc.
+GpgOL is to be cross compile for Windows on a GNU/Linux system.
+And then deployed on Windows.
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+The tested development platform is debian stable.
-Basic Installation
-==================
+Dependencies
+============
-These are generic installation instructions.
+GpgOL depends on the GnuPG libraries libassuan, libgpgme and libgpg-error
+it further needs a recent mingw-w64 gcc.
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+For debian this would be the packages:
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
+gcc-mingw-w64-x86-64
+gcc-mingw-w64-i686
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
+A convenience build setting is provided by gpgol and the dependency libraries
+to configure a cross compile for windows with ./autogen.sh --build-w32 or
+./autogen.sh --build-w64
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+The installation prefix will be ~/w32root or ~/w64root you can
+override this by setting the environment variables w32root or w64root.
-The simplest way to compile this package is:
+Example build from git:
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+PROJECTS="libgpg-error libassuan gpgme"
+root=$(mktemp -d)
+for proj in $PROJECTS; do
+ cd $root
+ git clone --depth 1 --branch master git://git.gnupg.org/${proj}.git
+ cd $proj
+ ./autogen.sh
+ mkdir build-w32
+ cd build-w32
+ ../autogen.sh --build-w32
+ make -j`nproc`
+ make install
+done
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+GpgOL Build
+===========
- 2. Type `make' to compile the package.
+Similarly you can use the --build-w32 option in gpgol
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+./autogen.sh
+mkdir build-w32
+cd build-w32
+../autogen.sh --build-w32
+make -j`nproc`
+Under src/gpgol.dll you then have the binary that you
+can deploy on Windows. See README for instructions on that.
diff --git a/README b/README
index 569e40f..8114264 100644
--- a/README
+++ b/README
@@ -22,6 +22,11 @@ available in a directory where Windows searches for DLLs
gpgol.dll" and start Outlook. You should then find a new tab named
"GnuPG" in Outlook's option menu.
+You will need an UiServer (either GPA or Kleopatra) in a location
+pointed to by the standard gpg4win registry keys. It is suggested
+you install gpg4win and then replace the gpgol.dll with your
+compiled binary.
+
If you are missing icons in the toolbar, checkout the toolbar's
customize button - you will find the new icons there.
-----------------------------------------------------------------------
Summary of changes:
INSTALL | 258 +++++++++++-----------------------------------------------------
README | 5 ++
2 files changed, 46 insertions(+), 217 deletions(-)
hooks/post-receive
--
GnuPG extension for MS Outlook
http://git.gnupg.org
More information about the Gnupg-commits
mailing list