[PATCH] migration to libusb-1.0
aheinecke at intevation.de
Fri Feb 26 12:55:45 CET 2016
On Friday 26 February 2016 09:22:04 NIIBE Yutaka wrote:
> If you see any problem with d0d9708 + 3d952a2, please let me know.
> I also keep using master to see if there will issues.
Today I was using master (75861b6) and at first everything worked normally.
Then it stopped working. I'm not sure what I did at the time the error is in
the log. I might have started a Windows VM in VirtualBox. But shutting it down
did not help with the error. And starting it again after the error was
resolved also did not cause it again.
The error in the log is:
2016-02-26 11:40:52 scdaemon DBG: ccid-driver: usb_bulk_write error:
2016-02-26 11:40:52 scdaemon updating reader 0 (-1) status: 0x0007-
2016-02-26 11:40:52 scdaemon sending signal 12 to client 3410
I have not removed the smartcard or the reader at that point. There might be
something wrong with my cable though. I see a disconnect with immediate
reconnect in dmesg log.
Sometime later I wanted to use the card for auth and the error is then:
2016-02-26 12:37:50 scdaemon DBG: ccid-driver: usb_claim_interface
2016-02-26 12:37:50 scdaemon DBG: chan_5 -> ERR 100663404 Card error
2016-02-26 12:37:51 scdaemon DBG: chan_5 <- SERIALNO
I'm sending you the full log of todays scdaemon session off list.
This time just restarting gpg-agent (and so scdaemon) fixed the problem which
it did not the first time I've had this problem.
Andre Heinecke | ++49-541-335083-262 | http://www.intevation.de/
Intevation GmbH, Neuer Graben 17, 49074 Osnabrück | AG Osnabrück, HR B 18998
Geschäftsführer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 648 bytes
Desc: This is a digitally signed message part.
More information about the Gnupg-devel