OmniKey CardMan 6121 & OpenPGP card anyone?

[Srihari Vijayaraghavan]

Werner Koch <wk at gnupg.org> wrote:
> On Tue,  9 Oct 2007 01:07, sriharivijayaraghavan at yahoo.com.au said:
> 
> > gpg: DBG: ccid-driver:   bMaxCCIDBusySlots       1
> > gpg: DBG: ccid-driver: usb_claim_interface failed: -1
> 
> Either you have insufficient permissions for the device or another
> process (e.g. pcscd) is using it.

Both conditions I've eliminated. Pls read below.
 
> > gpg: detected reader `OmniKey CardMan 6121 00 00'
> 
> Well, pcscd is up and has already claimed the device.  Stop it.

Now I've done that. It was starting between reboots. Sorry about that. Now
I've disabled the pcscd service for good now.
 
Here's the current status:
[root at laptop ~]# /usr/local/bin/gpg --card-status --debug-ccid-driver
gpg: DBG: ccid-driver: using CCID reader 0 (ID=076B:6622:X:0)
gpg: DBG: ccid-driver: idVendor: 076B  idProduct: 6622  bcdDevice: 0203
gpg: DBG: ccid-driver: ChipCard Interface Descriptor:
gpg: DBG: ccid-driver:   bLength                54
gpg: DBG: ccid-driver:   bDescriptorType        33
gpg: DBG: ccid-driver:   bcdCCID              1.00
gpg: DBG: ccid-driver:   nMaxSlotIndex           0
gpg: DBG: ccid-driver:   bVoltageSupport         7  ?
gpg: DBG: ccid-driver:   dwProtocols             3  T=0 T=1
gpg: DBG: ccid-driver:   dwDefaultClock       4800
gpg: DBG: ccid-driver:   dwMaxiumumClock      8000
gpg: DBG: ccid-driver:   bNumClockSupported      4
gpg: DBG: ccid-driver:   dwDataRate          10752 bps
gpg: DBG: ccid-driver:   dwMaxDataRate      412903 bps
gpg: DBG: ccid-driver:   bNumDataRatesSupp.    106
gpg: DBG: ccid-driver:   dwMaxIFSD             254
gpg: DBG: ccid-driver:   dwSyncProtocols  00000007  2-wire 3-wire I2C
gpg: DBG: ccid-driver:   dwMechanical     00000000
gpg: DBG: ccid-driver:   dwFeatures       000207B2
gpg: DBG: ccid-driver:     Auto configuration based on ATR
gpg: DBG: ccid-driver:     Auto clock change
gpg: DBG: ccid-driver:     Auto baud rate change
gpg: DBG: ccid-driver:     Auto PPS made by CCID
gpg: DBG: ccid-driver:     CCID can set ICC in clock stop mode
gpg: DBG: ccid-driver:     NAD value other than 0x00 accepted
gpg: DBG: ccid-driver:     Auto IFSD exchange
gpg: DBG: ccid-driver:     Short APDU level exchange
gpg: DBG: ccid-driver:   dwMaxCCIDMsgLen       271
gpg: DBG: ccid-driver:   bClassGetResponse    echo
gpg: DBG: ccid-driver:   bClassEnvelope       echo
gpg: DBG: ccid-driver:   wlcdLayout           none
gpg: DBG: ccid-driver:   bPINSupport             0
gpg: DBG: ccid-driver:   bMaxCCIDBusySlots       1
gpg: DBG: ccid-driver: usb_bulk_read error: Resource temporarily unavailable
gpg: DBG: ccid-driver: USB: CALLING USB_CLEAR_HALT
gpg: DBG: ccid-driver: usb_bulk_read error: Resource temporarily unavailable
gpg: DBG: ccid-driver: USB: RETRYING bulk_in AGAIN
gpg: DBG: ccid-driver: usb_bulk_read error: Resource temporarily unavailable
gpg: DBG: ccid-driver: USB: RETRYING bulk_in AGAIN
gpg: DBG: ccid-driver: status: 41  error: FE  octet[9]: 00
               data:
gpg: DBG: ccid-driver: CCID command failed: CCID timed out while talking to
the ICC
gpg: DBG: ccid-driver: status: 41  error: FE  octet[9]: 00
               data:
gpg: DBG: ccid-driver: CCID command failed: CCID timed out while talking to
the ICC
gpg: apdu_send_simple(0) failed: card inactive
gpg: DBG: ccid-driver: status: 01  error: 00  octet[9]: 01
               data:
gpg: DBG: ccid-driver: idVendor: 076B  idProduct: 6622  bcdDevice: 0203
gpg: DBG: ccid-driver: ChipCard Interface Descriptor:
gpg: DBG: ccid-driver:   bLength                54
gpg: DBG: ccid-driver:   bDescriptorType        33
gpg: DBG: ccid-driver:   bcdCCID              1.00
gpg: DBG: ccid-driver:   nMaxSlotIndex           0
gpg: DBG: ccid-driver:   bVoltageSupport         7  ?
gpg: DBG: ccid-driver:   dwProtocols             3  T=0 T=1
gpg: DBG: ccid-driver:   dwDefaultClock       4800
gpg: DBG: ccid-driver:   dwMaxiumumClock      8000
gpg: DBG: ccid-driver:   bNumClockSupported      4
gpg: DBG: ccid-driver:   dwDataRate          10752 bps
gpg: DBG: ccid-driver:   dwMaxDataRate      412903 bps
gpg: DBG: ccid-driver:   bNumDataRatesSupp.    106
gpg: DBG: ccid-driver:   dwMaxIFSD             254
gpg: DBG: ccid-driver:   dwSyncProtocols  00000007  2-wire 3-wire I2C
gpg: DBG: ccid-driver:   dwMechanical     00000000
gpg: DBG: ccid-driver:   dwFeatures       000207B2
gpg: DBG: ccid-driver:     Auto configuration based on ATR
gpg: DBG: ccid-driver:     Auto clock change
gpg: DBG: ccid-driver:     Auto baud rate change
gpg: DBG: ccid-driver:     Auto PPS made by CCID
gpg: DBG: ccid-driver:     CCID can set ICC in clock stop mode
gpg: DBG: ccid-driver:     NAD value other than 0x00 accepted
gpg: DBG: ccid-driver:     Auto IFSD exchange
gpg: DBG: ccid-driver:     Short APDU level exchange
gpg: DBG: ccid-driver:   dwMaxCCIDMsgLen       271
gpg: DBG: ccid-driver:   bClassGetResponse    echo
gpg: DBG: ccid-driver:   bClassEnvelope       echo
gpg: DBG: ccid-driver:   wlcdLayout           none
gpg: DBG: ccid-driver:   bPINSupport             0
gpg: DBG: ccid-driver:   bMaxCCIDBusySlots       1
Please insert the card and hit return or enter 'c' to cancel:

I've ensured the card is inserted & pressed enter many times to no avail :-(.

(I've a few extra OpenPGP cards, so if push comes to shove, I'll slice them to
SIM size to check it out on this reader(s). Alas I've no other model of a card
reader to rule out the readers themselves.)

Thanks for your assistance.


      Sick of deleting your inbox? Yahoo!7 Mail has free unlimited storage.
http://au.docs.yahoo.com/mail/unlimitedstorage.html