NXWEB 3.0 is out (adds SSL, http proxy, and even better performance)

Marcel Wijnen mmfwwijnen at gmail.com
Mon Jun 25 01:29:01 CEST 2012


Excuse me for the last post. The server works out of the box. Thanks!


On Monday, June 25, 2012 1:18:29 AM UTC+2, Marcel Wijnen wrote:
>
> Hi Yaroslav,
>
> Since I'm trying to set nxweb up with ssl, I've configures with 
> "./configure --with-gnutls". The configuration seems to work (all tests are 
> ran and the configuration does not end with any failures). Then I make and 
> sudo make install.
>
> During this process I see that a key is generated and in the ssl folder I 
> think that the key and certificate are present
> /nxweb-3.0.1-dev/ssl/ca.cfg
> /nxweb-3.0.1-dev/ssl/ca_cert.pem
> /nxweb-3.0.1-dev/ssl/ca_key.pem
> /nxweb-3.0.1-dev/ssl/dh.pem
> /nxweb-3.0.1-dev/ssl/Makefile
> /nxweb-3.0.1-dev/ssl/Makefile.am
> /nxweb-3.0.1-dev/ssl/Makefile.in
> /nxweb-3.0.1-dev/ssl/server.cfg
> /nxweb-3.0.1-dev/ssl/server_cert.pem
> /nxweb-3.0.1-dev/ssl/server_key.pem
>
> When I run
> *./nxweb
>
> *I get the following output and error message
> *2012-06-25 01:07:00 [14276:0xb73788e0]: nxweb binding :8055 for http
> 2012-06-25 01:07:00 [14276:0xb73788e0]: nxweb binding :8056 for https
> 2012-06-25 01:07:00 [14276:0xb73788e0]: No certificate or key were found
> *
> Is there something trivial that I've forgotten to do here? Should I use 
> any flags or do some additional configuration?
>
> Could you help me out on this? Thanks in advance.
>
> Best,
> Marcel
>
>  
>
> On Sunday, April 1, 2012 9:11:46 PM UTC+2, Yaroslav wrote:
>>
>> Hi Nikos,
>>
>> That's good. Thank you very much for the reference.
>>
>> http://vincent.bernat.im/en/blog/2011-ssl-benchmark-round2.html
>> Have you seen those benchmarks? There was no GnuTLS tested but now I 
>> think it could be. Do you happen to know the author?
>>
>> Yaroslav
>>
>> On Sun, Apr 1, 2012 at 10:26 PM, Nikos Mavrogiannopoulos  wrote:
>>
>>> On 01/27/2012 08:52 PM, Yaroslav wrote:
>>>
>>> > I'd be happy if somene could do independent benchmarks of nxweb on
>>> > different hardware. So that we know for sure that it is all true :)
>>>
>>>
>>> Hello Yaroslav,
>>>  I've done benchmarks on a small system and pretty much verify your
>>> results. I've put at:
>>>
>>>
>>> http://nikmav.blogspot.com/2012/04/in-some-embedded-systems-space-may.html
>>>
>>> regards,
>>> Nikos
>>>
>>> PS. I've modified httpress to print "rps" as floating point, because the
>>> numbers were really small for this system.
>>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </pipermail/attachments/20120624/55fb5ec0/attachment.htm>


More information about the Gnutls-devel mailing list