GPA and OpenPGP Cryptocard

[Mario Fuerderer]

Hi Bernhard,

On Tue, 31 May 2005 18:03:22 +0200
Bernhard Reiter <bernhard at intevation.de> wrote:

> you could try gnupg-1.4.2rc1 which was released recently
> and see if the problems persist.

I just tried using the following constellation:

	- sylpheed 1.9.12
	- GnuPG 1.4.2rc1
	- GPGME 0.9.0
	- GPA 0.7.0

unfortunately I experienced the same problem again.
For me it looks like gpg is waiting for the passphrase/pin, that should
be supplied by sylpheed/gpa. But in fact, the tools liked against gpgme,
don't even prompt for a passphrase/pin...


> If so, can you also check the debugging output?

Here it comes:

(...snip...)
gpgme_debug: level=5
posix-io.c:135: closing fd 7
posix-io.c:72: fd 6: about to read 79 bytes
posix-io.c:79: fd 6: got 79 bytes
fd 6: got `gpg (GnuPG) 1.4.2rc1
NOTE: THIS IS A DEVELOPMENT VERSION!
It is only intended f'
posix-io.c:135: closing fd 6
posix-io.c:157: set notification for fd 7
posix-io.c:157: set notification for fd 9
posix-io.c:157: set notification for fd 10
posix-io.c:157: set notification for fd 11
posix-io.c:157: set notification for fd 12
posix-io.c:157: set notification for fd 13
posix-io.c:157: set notification for fd 14
posix-io.c:157: set notification for fd 15
posix-io.c:135: closing fd 9
posix-io.c:135: closing fd 10
posix-io.c:135: closing fd 12
posix-io.c:135: closing fd 15
posix-io.c:329: gpgme:select on [ r7 w13 r14 ]
posix-io.c:375: select OK [ r7 w13 ]
posix-io.c:72: fd 7: about to read 1024 bytes
posix-io.c:79: fd 7: got 30 bytes
fd 7: got `[GNUPG:] PROGRESS stdin ? 0 0
'
posix-io.c:93: fd 13: about to write 126 bytes
fd 13: write `Content-Type: text/plain; charset=US-ASCII^M
Content-Disposition: inline^M
Content-Transfer-Encoding: quoted-printable^M
^M
test^M
'
posix-io.c:101: fd 13:          wrote 126 bytes
posix-io.c:329: gpgme:select on [ r7 w13 r14 ]
posix-io.c:375: select OK [ w13 ]
posix-io.c:135: closing fd 13
wait.c:160: setting fd 13 (item=0x8303718) done
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ r7 ]
posix-io.c:72: fd 7: about to read 1024 bytes
posix-io.c:79: fd 7: got 32 bytes
fd 7: got `[GNUPG:] PROGRESS stdin ? 126 0
'
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ r7 ]
posix-io.c:72: fd 7: about to read 1024 bytes
posix-io.c:79: fd 7: got 53 bytes
fd 7: got `[GNUPG:] CARDCTRL 3 D2760001240101010001000004C70000
'
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ r7 ]
posix-io.c:72: fd 7: about to read 1024 bytes
posix-io.c:79: fd 7: got 78 bytes
fd 7: got `[GNUPG:] NEED_PASSPHRASE_PIN OPENPGP 1
[GNUPG:] GET_HIDDEN passphrase.pin.ask
'
posix-io.c:329: gpgme:select on [ r7 w11 r14 ]
posix-io.c:375: select OK [ w11 ]
wait.c:160: setting fd 11 (item=0x8303398) done
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
posix-io.c:375: select OK [ ]
posix-io.c:329: gpgme:select on [ r7 r14 ]
(...snip...)


	Mario

-- 
Mario Fürderer <mario at codehack.org>