FreeBSD 3.0 fix (was: gpg 0.4.1 build problems)

[Werner Koch]

Bryan Fullerton <bryanf at samurai.com> writes:

> checking host system type... i386-unknown-freebsd3.0

Okay, mpi/config.links does not recognize this as a ELF system.
(it assumes a name of *freebsd*-elf).
I fixed this.  Replace your mpi/config.links with the attached file
and do a "./configure && make"


Hope this helps,


  Werner 
-------------- next part --------------
# sourced my ../configure to get the list of files to link
# this should set $mpi_ln_src and mpi_ln_dst.
# Note: this is called from the above directory.


mpi_extra_modules=

test -d ./mpi || mkdir ./mpi

echo '/* created by config.links - do not edit */' >./mpi/asm-syntax.h

case "${target}" in
    i[34]86*-*-freebsd*-elf | i[34]86*-*-freebsd3*)
       echo '#define ELF_SYNTAX' >>./mpi/asm-syntax.h
       cat  $srcdir/mpi/i386/syntax.h	   >>./mpi/asm-syntax.h
       path="i386"
       ;;
    i[56]86*-*-freebsd*-elf | i[56]86*-*-freebsd3*)
       echo '#define ELF_SYNTAX' >>./mpi/asm-syntax.h
       cat  $srcdir/mpi/i386/syntax.h	   >>./mpi/asm-syntax.h
       path="i586 i386"
       ;;
    i[34]86*-*-linuxaout* | i[34]86*-*-linuxoldld* | i[34]86*-*-*bsd*)
	echo '#define BSD_SYNTAX' >>./mpi/asm-syntax.h
	echo '#define X86_BROKEN_ALIGN' >>./mpi/asm-syntax.h
	cat  $srcdir/mpi/i386/syntax.h	    >>./mpi/asm-syntax.h
	path="i386"
	;;
    i[56]86*-*-linuxaout* | i[56]86*-*-linuxoldld* | i[56]86*-*-*bsd*)
	echo '#define BSD_SYNTAX' >>./mpi/asm-syntax.h
	echo '#define X86_BROKEN_ALIGN' >>./mpi/asm-syntax.h
	cat  $srcdir/mpi/i386/syntax.h	    >>./mpi/asm-syntax.h
	path="i586 i386"
	;;
    i[34]86*-*-*)
	echo '#define ELF_SYNTAX' >>./mpi/asm-syntax.h
	cat  $srcdir/mpi/i386/syntax.h	    >>./mpi/asm-syntax.h
	path="i386"
	;;
    i[56]86*-*-* | pentium-*-* | pentiumpro-*-*)
	echo '#define ELF_SYNTAX' >>./mpi/asm-syntax.h
	cat  $srcdir/mpi/i386/syntax.h	    >>./mpi/asm-syntax.h
	path="i586 i386"
	;;
    alpha*-*-*)
	echo '/* configured for alpha */' >>./mpi/asm-syntax.h
	path="alpha"
	mpi_extra_modules="udiv-qrnnd"
	;;
    hppa7000*-*-*)
	echo '/* configured for HPPA (pa7000) */' >>./mpi/asm-syntax.h
	path="hppa1.1 hppa"
	mpi_extra_modules="udiv-qrnnd"
	;;
    hppa1.0*-*-*)
	echo '/* configured for HPPA 1.0 */' >>./mpi/asm-syntax.h
	path="hppa"
	mpi_extra_modules="udiv-qrnnd"
	;;
    hppa*-*-*)	# assume pa7100
	echo '/* configured for HPPA (pa7100) */' >>./mpi/asm-syntax.h
	path="pa7100 hppa1.1 hppa"
	mpi_extra_modules="udiv-qrnnd"
	;;
    sparc9*-*-* | sparc64*-*-* | ultrasparc*-*-*)
	echo '/* configured for sparc9 or higher */' >>./mpi/asm-syntax.h
	path="sparc32v8 sparc32"
	;;
    sparc8*-*-* | microsparc*-*-*)
	echo '/* configured for sparc8 */' >>./mpi/asm-syntax.h
	path="sparc32v8"
	;;
    supersparc*-*-*)
	echo '/* configured for supersparc */' >>./mpi/asm-syntax.h
	path="supersparc sparc32v8 sparc32"
	mpi_extra_modules="udiv"
	;;
    sparc*-*-*)
	echo '/* configured for sparc */' >>./mpi/asm-syntax.h
	path="sparc32"
	mpi_extra_modules="udiv"
	;;
    mips[34]*-*-* | mips*-*-irix6*)
       echo '/* configured for MIPS3 */' >>./mpi/asm-syntax.h
       path="mips3"
       ;;
    mips*-*-*)
       echo '/* configured for MIPS2 */' >>./mpi/asm-syntax.h
       path="mips2"
       ;;

    # Motorola 68k configurations.  Let m68k mean 68020-68040.
    # mc68000 or mc68060 configurations need to be specified explicitly
    m680[234]0*-*-linuxaout* | m68k*-*-linuxaout*)
	echo '#define MIT_SYNTAX'            >./mpi/asm-syntax.h
	cat  $srcdir/mpi/m68k/syntax.h	    >>./mpi/asm-syntax.h
	path="m68k/mc68020 m68k"
	;;
    m68060*-*-linuxaout*)
	echo '#define MIT_SYNTAX'            >./mpi/asm-syntax.h
	cat  $srcdir/mpi/m68k/syntax.h	    >>./mpi/asm-syntax.h
	path="m68k"
	;;
    m680[234]0*-*-linux* | m68k*-*-linux*)
	echo '#define ELF_SYNTAX'            >./mpi/asm-syntax.h
	cat  $srcdir/mpi/m68k/syntax.h	    >>./mpi/asm-syntax.h
	path="m68k/mc68020 m68k"
	;;
    m68060*-*-linux*)
	echo '#define ELF_SYNTAX'            >./mpi/asm-syntax.h
	cat  $srcdir/mpi/m68k/syntax.h	    >>./mpi/asm-syntax.h
	path="m68k"
	;;
    m68000*-*-* | m68060*-*-*)
	echo '#define MIT_SYNTAX'            >./mpi/asm-syntax.h
	cat  $srcdir/mpi/m68k/syntax.h	    >>./mpi/asm-syntax.h
	path="m68k/mc68000"
	;;
    m680[234]0*-*-* | m68k*-*-*)
	echo '#define MIT_SYNTAX'            >./mpi/asm-syntax.h
	cat  $srcdir/mpi/m68k/syntax.h	    >>./mpi/asm-syntax.h
	path="m68k/mc68020 m68k"
	;;
    *)
	echo '/* No assembler modules configured */' >>./mpi/asm-syntax.h
	path=""
	;;
esac


case "${target}" in
    *-*-linuxaout* | *-*-linuxoldld* | *-*-linux-gnuoldld*)
	needs_underscore="y"
	;;
    *-*-linux* | *-sysv* | *-solaris* | *-gnu* | *-freebsd*-elf)
	needs_underscore="n"
	;;
    *)
	needs_underscore="y"
	;;
esac


# Make sysdep.h
echo '/* created by config.links - do not edit */' >./mpi/sysdep.h
if test "$needs_underscore" = "y" ; then
    cat <<EOF >>./mpi/sysdep.h
#if __STDC__
#define C_SYMBOL_NAME(name) _##name
#else
#define C_SYMBOL_NAME(name) _/**/name
#endif
EOF
else
    cat <<EOF >>./mpi/sysdep.h
#define C_SYMBOL_NAME(name) name
EOF
fi


# fixme: grep these modules from Makefile.in
mpi_ln_modules="${mpi_extra_modules} mpih-add1 mpih-mul1 mpih-mul2 mpih-mul3 \
		 mpih-lshift mpih-rshift mpih-sub1"

mpi_ln_objects=
mpi_ln_src=
mpi_ln_dst=

# try to get file to link from the assembler subdirectory and
# if this fails get it from the generic subdirectory.
path="$path generic"
for fn in $mpi_ln_modules ; do
    mpi_ln_objects="$mpi_ln_objects $fn.o"
    for dir in $path ; do
	rm -f $srcdir/mpi/$fn.[Sc]
	if test -f $srcdir/mpi/$dir/$fn.S ; then
	    mpi_ln_src="$mpi_ln_src mpi/$dir/$fn.S"
	    mpi_ln_dst="$mpi_ln_dst mpi/$fn.S"
	    break;
	elif test -f $srcdir/mpi/$dir/$fn.c ; then
	    mpi_ln_src="$mpi_ln_src mpi/$dir/$fn.c"
	    mpi_ln_dst="$mpi_ln_dst mpi/$fn.c"
	    break;
	fi
    done
done